MDL GM TKX 5-Speed, Front Socket/ 1.00" & 1.50" Offset Stub. 2.87 first, .81 od

MDL mods bring the shifter stub up in the OE position
Click here to see what's different

Features:
- Gear Ratios 2.87, 1.89, 1.28, 1, .81od - 26 spline input, 31 spline output
   MDL mods bring the shifter stub up in the OE position

TKX is the next generation in five speedsWith end-loading design, which provides such advantages as:

• greater tunnel clearance
• increased case strength, and fewer case seams.

All this and 8000 RPM shifting & 600lbs/ft. torque capacity

Sintered carbon/bronze-Hybrid triple cone synchro's with a non-leading tooth profile Product Features

• Sintered carbon/bronze-Hybrid triple cone synchros...with a non-leading tooth profile.
• Close gear ratio (2.87, 1.89, 1.28, 1.00, .81) high-performance applications
• Utilizes GM TKO bolt pattern & 7.2? length input shaft(with a short input shaft option you can bolt to:GM close pattern 3-4 speed bellhousings)
• 26-spline input shaft & a 31-spline output shaft for added strength.
• GM .590 pilot tip and 1.375? OD throwout bearing guild tube.
• Robust design with an internal 3-rail shift system & steel shift forks.
• All gears & shafts are made from special grade steel (ASTM 4615) for the increased demands of today's engines.
• Single-piece countershaft provides an increased torque carrying capacity.
• Tapered roller bearings on input, output & counter shafts improve performance....(reducing noise factor) with a caged needle bearing on the main shaft.
• Equipped with an MDL high-performance short-throw billet aluminum shifter that isolates road noise, while providing clean crisp shifts......(See more detail on the MDL shifter here)
• A new smaller mid-position shifter mounting base reduced the footprint
• Built-in reverse light switch on the left side
• Cruise control safety switch location on the right side of the TKX.
• The rear main-shaft support bushing moved from the tail closer to the gearbox provides better support.
• All mating surfaces are sealed with gaskets

If you are making over 400 hp and need an update from your four-speed this is the transmission for you.

We offer complete TKX five-speed packagesThey are totally customizable.Contact us today for a detailed quote.

Experience the MDL difference:
When you purchase a complete MDL Conversion Package you get

• We extend the manufacturers warranty by an extra year with a 1-year grace period.
• We have the best in the industry customer service.
• lifetime technical support.

TKX offers even more:

• Three shifter locations are standard.(For the Mid position, an additional kit is required)
• Ford Mechanical 7-tooth speedometer cable drive gear
• The reluctor wheel is 17-tooth.
• OSS two-wire Analog speedometer sensor built-in.
• Reduce engine rpm to a level that makes it fun to drive besides enhancing fuel efficiency.

Lubricant Specifications

For all Tremec TKX 5-Speed models, the recommended oil are:

• Dexron III ATF
• Amzoil ATF
• Tremec High-Performance manual transmission Fluid (HP-MTF)
• Mobil 1 Synthetic ATF.

Fluid capacity is 2.7 quarts / 2.6 Liters.

Fluid Maintenance LINK for Tremec Transmissions

GM	Gear Ratios					Spline count
Item #	1st	2nd	3rd	4th	5th	Input	output
TCET17722	2.87	1.89	1.28	1.00	0.81	26	31
TCET17805	2.87	1.89	1.28	1.00	0.68	26	31
TCET18083	3.27	1.98	1.34	1.00	0.72	26	31